Fluke 721Ex-3650 Dual Sensor Pressure Calibrator

Description

Fluke 4353514 Includes

(1) Soft case
(4) AA batteries
(1) Manual
(1) Traceable calibration certificate
(1) Test leads

Fluke 4353514 Features

Intrinsically Safe (721Ex version only) – IECEx and Atex Ex ia IIB T3 Gb (Zone 1)
Ideal for gas flow calibration (custody transfer) applications
Two isolated, stainless steel, pressure sensors with 0.025 % accuracy
Pt100 RTD input for temperature measurement, (probe optional)
Switch test on both pressure inputs
Pressure displayed in the user’s choice of 19 engineering units
Large backlit graphic display can display up to three inputs simultaneously
Store five instrument setups for recall and use

Fluke 4353514 Specifications

Instrument setup recall
Last used on power-up

Environmental
Operating temperature -10°C to +45°C. Storage temperature (without batteries) -20°C to +60°C.

Altitude
2,000 m

Ingress protection
IP-40

Power requirements
6.0 V DC

Battery life
>35 hours, typical usage

Batteries required
4 Standard AA cells

Dimensions (H x W x D)
7.9″ x 4.3″ x 2.3″

Connectors/ports pressure
Two, 1/8 in NPT, 700P Series Pressure Module; RTD Probe

Low pressure range
-14 psi to +36 psi, -0.97 bar to 2.48 bar

High pressure range
0 psi to +5000 psi, 0.00 bar to 345 bar

Low resolution
0.001 psi, 0.0001 bar

High resolution
0.1 psi, 0.01 bar

Low Accuracy
0.025% of full scale

High Accuracy
0.035% of full scalePressure calibration and temperature measurement for custody transfer applications. The ideal tool for gas custody transfer applications in potentially explosive atmospheres is the Fluke 721Ex Precision Pressure Calibrator. With dual isolated pressure sensors, it allows you to take simultaneous static and differential pressure measurements with a single tool. The 721Ex can be configured by selecting either a 16 PSI (1.1 bar) or 36 psi (2.48 bar) low pressure sensor then add any of 7 high pressure ranges including 100, 300, 500, 1000, 1500, 3000 or 5000 psi (6.9, 20, 24.5, 69, 103.4, 200, 345 bar).